FLORIDA INJECTION MARINE INJECTION

Marine Gas Fuel Injection

Clean Test Rebuild Outboard, Inboard and I/O Injectors

Jump to NEW MARINE GAS INJECTORS or AUTO/LIGHT TRUCK GAS INJECTORS Click here for FICHT and ETEC FICHT and ETEC Injectors

Florida Injection has a considerable investment in machines to bring your boat injectors back to life.

-Florida Injection is able to do excellent work because we have the newest technology and equipment. We take the time to do it right. We have over the many years learned how to do your injectors so they are clean and back to spec.. We are accurate and can test injectors in a wide range of simulated engine conditions.
-This allows us to see how an injector is causing your engine problems and over 99% of the time we can fix the injector. We currently have seven injector cleaning, flowing and ultrasonic machines. Florida Injection works on all sorts of “hopeless” fuel injectors.
-We continue to impress our customers with our ability to deliver! Normal turnaround times are 3-4 hours. If you bring in your injectors first thing in the morning, they usually can be done same day, without an appointment.
-We are located on the North end of St. Petersburg in Pinellas Park, Florida. Visit us and see how we can save you and your customers money!
NOTE: We do not work on chinese injectors. These typically come from ebay or amazon. They are usually problematic and a waste of time for us to work on them only to have to tell you we cannot make them flow to spec..

Here are just some examples of top feed boat injectors we do. We also do GM TBI injectors and throttle bodies.

Cleaning and rebuilding process for boat injectors

We use modern ultrasonic machines designed for cleaning inboard, I/O and outboard gas fuel injectors. By the time we get your injectors, they are usually in pretty tough shape and need an extended time in the machines.

We visually inspect the injectors and pre-clean if necessary.
We electronically test the injectors.
We strip the replaceable components off of the injectors
We ultrasonic clean the injectors for 90 minutes then inspect them. Inspect for ethenol contamination.
We ultrasonic clean them for another 90 minutes if necessary.
We reverse flow them for 10 minutes.
We flow clean the injectors for up to 3 hours depending on how the injectors perform.
We verify that the injectors are in spec..
We purge the injectors of process fluids and pack/ship them to you.

Why clean injectors first?

Because dirty fuel injectors are the #1 reason your boat engine underperforms.

Out of sight, out of mind, right? An injector is buried under a million hoses and harnesses in the bilge. They are easy to ignore. They are in or next to the hottest part of the engine and yet even in a boat, they run for hundreds or a thousand+ of hours with compromised fuel. In a boat, they have to survive winter layups, water and constant high loads.

Like a car, you are probably unaware that your injectors are getting plugged up and running at less that 100%. Your computer can make up for this for a while, then when it no longer can, you notice poor performance or poor gas mileage. You may even see hard starts and smell gas once in a while from fuel injectors that stick open. A common symptom is you have a hard time getting up on plane and can't get to WOT and top speed.

Do you need more information? You can call us at any time at 727-459-8394 to see if we can give you some advice or help you get your engine running at peak performance today.

Florida Injection Service cleans and rebuilds Mercury Optimax Side feed and air injectors for $35.00 each. Return shipping to Florida customers is free!